PPDE — black recycled PP/HDPE pellets
Black recycled PP + HDPE from post-consumer rigid packaging, for injection-moulded and rigid parts.
Download the data sheet (PDF, EN)
Key facts
- Format
- Pellets · 1,000 kg big bags · homogeneous 10 t lots
- Colour
- Black
- Composition
- PP 45 % · HDPE 55 %*
* Composition values are approximate, determined by DSC.
Properties
| Property | Standard | Typical value |
|---|---|---|
| Melt flow index (MFI) | UNE-EN ISO 1133-1 | 6 – 8 g/10 min |
| Density | UNE-EN ISO 1183-1 | 0.94 – 0.96 g/cm³ |
| Moisture | Internal method | < 0.15 % |
| Ash | UNE-EN ISO 3451 | < 4 % |
| Vicat softening temperature | UNE-EN ISO 306 | 59 – 65 °C |
| Flexural modulus | — | 750 – 850 MPa |
Processing compatibility
- Injection
- Extrusion
- Rotomoulding
- Blow moulding
- Cast film
- Thermoforming
Main uses
- Logistics: non-food pallets, skids, returnable crates, load separators
- Industrial packaging: crates, tubs, parts trays, non-food containers, lids
- Profiles and plastic lumber: posts, planks, slats, kerbs, fencing
- Boards and panels
- Street furniture: benches, tables, bins, planters
- Gardening: edging, raised beds, composters
- Agriculture and livestock: fence posts, stable panels
- Construction: chocks, spacers, formwork accessories, column guards
- Buried infrastructure: cable protection covers, duct covers, channel lids
- Temporary paving and ground protection
- Parking: wheel stops, bollards
- Composites: WPC and filled parts
Non-food applications only.
Why it works
Same data sheet every lot
The same data sheet and the same composition, lot after lot.
Traceable post-consumer origin
Post-consumer recycled material of EU origin, fully traceable.
Produced in Spain
Made in Spain from post-consumer material.
Big bags and 10 t lots
1,000 kg big bags in homogeneous 10 t lots. Reference standard UNE-EN 15344.
Frequently asked questions
What is PPDE?
+
PPDE is a black recycled PP + HDPE pellet made from post-consumer recycled material of EU origin. Its approximate composition is PP 45 % · HDPE 55 % (determined by DSC).
What is PPDE used for?
+
Main uses: Logistics: non-food pallets, skids, returnable crates, load separators; Industrial packaging: crates, tubs, parts trays, non-food containers, lids; Profiles and plastic lumber: posts, planks, slats, kerbs, fencing. It is for non-food applications only.
What are the MFI and density of PPDE?
+
Typical MFI is 6 – 8 g/10 min (UNE-EN ISO 1133-1) and density is 0.94 – 0.96 g/cm³ (UNE-EN ISO 1183-1).
How is it supplied?
+
In 1,000 kg big bags, in homogeneous 10 t lots, FCA, Spain.
Can I get a sample?
+
Yes. We send you a free 15 kg bag to test on your line.
Is it suitable for food contact?
+
No. It is for non-food applications only.
Where is it produced?
+
In Spain, from post-consumer material.
How consistent is it between lots?
+
Every lot has the same data sheet and the same composition, and every lot is traceable.
What is the price?
+
Leave your email on this page and we send you the current price and the data sheet.
Get the price and the data sheet
Leave your email and we send you the current price. Free 15 kg sample available.